TMFT36 SKF Bearing Fitting Hand Tool Kit

TMFT36 SKF Bearing Fitting Hand Tool Kit

Impact rings

         Bore diameter    10–55 mm (0.39–2.17 in.)

         Outer diameter   26–120 mm (1.02–4.72 in.)

Sleeves  Maximum shaft length

          Sleeve A: 220 mm (8.7 in.)

          Sleeve B: 220 mm (8.7 in.)

          Sleeve C: 225 mm (8.9 in.)

Hammer  TMFT 36-H, weight 0,9 kg (2.0 lb)

Carrying case dimensions       530 × 110 × 360 mm (20.9 × 4.3 × 14.2 in.)

Number of ring               36

Number of sleeve             3

Weight(including carrying case)  4,4 kg (9.7 lb)

TMFT 36 is suitable for SKF bearing series

DGBB:  6000–6011    6200–6211     6300–6311  6403–6409   

629    62/22     62/28    63/22   63/281  

6002–16011    16100–16101  98203–98206

DGBB (sealed):  62200–62211    62300–62311    63000–63010

SABB: 1200 - 1211   129   1301 - 1311   2200 - 2211  2301 - 2311   11207 - 11210

SRACBB: 7000 - 7011   7200 - 7211   7301 - 7311

DRACBB: 3200 - 3211   3302 - 3311   

SRB: 21305 - 21311   22205 - 22211   22308 - 22311    

CRB: N 1005 - N 1011  N 202 - N 211    N 2203 - N 2211   N 2304 - N 2311   

N 3004 - N 3011  N 303 - N 311

TRB: 30203 - 30211      30302 - 30311   31305 - 31311   32004 - 32011   32205 - 32211    32303 32311    33010 - 33011    33205 - 33211

CARB: C 2205 - C 2211 C 4010 C 6006

Interference fits on cylindrical shaftsMost bearings are fitted to their shaft or housing with one component having an interference fit. For determining the correct fit, refer to the SKF General Catalogue, the SKF Maintenance Handbook or consult an SKF application enginee

                        Shaft interference fit                                          Housing interference fit

Incorrect mountingWhen bearings are mounted cold, care must be taken to ensure the drive-up forces are applied to the ring with the interference fit. Damage to the bearing resulting in a failure can occur if the mounting force is transmitted through the rolling elements causing damage to the raceways

Uneven distribution of forces can result in raceway dama

Correct mountinThe correct way to minimise raceway damage is to use specifically designed tools from SKF, such as the Bearing fitting tool kits and Combi kits. These tools allow drive-up forces to be applied effectively and evenly to the component with the interference fit, avoiding raceway damage

With the correct tools, raceway damage is avoided

JINGPENG MACHINERY & EQUIPMENT (SHANGHAI) CO., LTD

Penny Wang

Email: penny@yosobearing.com
Ph/Whatsapp/Wechat: +86 15132291372
Skype: pennywang10.23
QQ: 582240277